Product Info
PRODUCT DIMENSIONS
- Object dimensions from inside the mold:
- Inside diameter: 12.5 cm x 2 cm height
- Outside diameter: 13 cm x 2.5 cm height
- Container weight: ~80 g average value, based on stone powder casting
- Mold weight: 200 g silicone
- Liquid capacity of the container: 90 g
- You can obtain 1 starfish-shaped container per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: Molds are made from durable white silicone with optimal hardness that does not damage object details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: With proper storage and usage, you can cast approximately 500 objects.
- Multi-Purpose Casting Advantage: Due to their structure, silicone molds are suitable for multi-purpose casting. Except for stone powder casting, they are compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to the drying and working conditions of your casting material, you can create many different products. Not recommended for food products.
- Package Contents: The containers shown in the images are not included in the sale. Only a high-quality silicone mold to produce the container will be sent with your order.
- Special Kraft Box and Information Label: Your product will be sent in a special kraft box with a label containing gram and size information to help you calculate raw material usage easily. This label prevents material waste and saves you from searching for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since molds have multi-purpose casting advantages, they are sent without wick holes being cut. Before casting wax, you can easily pierce the point where the wick will pass using a tool called a 'biz' or a medium-thickness quilting needle in seconds without damaging the mold.
- Level the Surface: To achieve a perfect form, ensure the surface where you place the mold before casting is flat and level.
- Stone Powder Mixture Ratio Tip: The reference mixture ratio is 310-350 g water per 1 kg of powder. Correctly adjusting the stone powder and water ratio makes the resulting object stronger and more durable. Increasing water ratio increases brittleness; decreasing it makes pouring and spreading the mixture in the mold harder. Also, adjust these ratios seasonally as ambient temperature changes.
- Air Bubble Warning: Adding the required amount of Li-Quit Air Entrainer after mixing stone powder with water minimizes air bubbles. The reference ratio is 1-3 g Li-Quit Air Entrainer per 100 g mortar. After casting, gently tapping the mold to create vibrations helps air bubbles rise to the surface.
- Demolding Time: To ensure smooth details, do not remove the casting from the mold before the stone powder fully cures and the heating phase ends.
- Use of Mold Release Spray: For serial productions, you can use mold release spray to extend mold life and release objects faster. Apply the spray evenly inside the mold to form a uniform layer.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: Wash with soapy water after casting and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You can use wet wipes, adhesive tape, or cologne wipes for quick cleaning.
Remember, every casting is an enjoyable experience in itself. We wish you a joyful and patient production process.
