Product Info
PRODUCT DIMENSIONS
- Candle dimensions from the mold: 8 cm width x 16 cm length x 1 cm height
- Average candle weight: ~90 g
- Mold weight: 190 g
- You can create one coffee bean textured chocolate bar-shaped candle per pour.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made from durable white silicone with optimal hardness that does not damage candle details. They are flexible with smooth inner surfaces.
- Pouring Guarantee: When stored and used properly, you can pour approximately 500 candles with this mold.
- Multi-Purpose Pouring Advantage: Due to their silicone composition, these molds are suitable for multiple uses. Besides candle pouring, they are compatible with soap, concrete, epoxy, scented stone, ceramic, and plaster casting. By paying attention to the freezing and working conditions of your material, you can create many different products. Not recommended for food products.
- Package Contents: The candles and stone powder casts shown in the images are not included in the sale. Only the high-quality silicone mold that allows you to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be sent in a special kraft box with a label that includes gram and dimension information to help you calculate raw material usage easily. This label prevents material waste and saves you from searching for digital data every time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since the molds have multi-purpose pouring advantages, they are sent without wick holes being cut or drilled. Before pouring, you can easily pierce the wick hole point in seconds without damaging the mold using a tool called a "piercer" or a medium-thickness quilting needle.
- Level the Surface: To achieve a flawless form, ensure the surface where you place the mold before pouring is flat and level.
- Temperature Balance: Pay attention to the melting and pouring temperature of the wax to ensure smooth details. Trying to remove the candle from the mold before it is fully cooled and solidified may cause loss of details and shape differences.
- Colored Pouring Tip: If your wax mixture is colored, the silicone mold may change color after pouring. Following cleaning and storage instructions will minimize color transfer in subsequent pours. To reduce workload and risk, we recommend having separate molds for colored and white pours.
- Use of Mold Release Spray: For mass production, you can use mold release spray to extend mold life and release objects quickly. When applying, ensure an even layer on the mold's inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After pouring, gently heat the mold interior with a hot air gun and wipe off wax residues with paper towels. Then wash with soapy water and dry thoroughly.
- Perfect Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry and place it in its original kraft box. Store away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or cologne wipes for instant cleaning.
Remember, every candle pour is an enjoyable experience. We wish you a joyful and patient production process.
