Product Info
PRODUCT DIMENSIONS
- Candle size from mold: Diameter 8 cm x 3 cm height
- Average candle weight: ~55 g
- Mold weight: 135 g
- You can create 1 lotus flower 2 shaped candle per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made of durable white silicone with optimal hardness that does not damage candle details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: When stored and used properly, you can cast approximately 500 candles with this mold.
- Multi-Purpose Casting Advantage: Due to their structure, silicone molds offer multi-purpose casting benefits. Besides candle casting, they are compatible with soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to the freezing and working conditions of your raw material, you can create many different products. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in the images are not included in the sale. Only the high-quality silicone mold that allows you to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be sent in a special kraft box with a label containing gram and size information to help you calculate raw material easily. This label prevents material waste and saves you from searching for digital data every time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since the molds have multi-purpose casting advantages, they are sent without wick holes being cut or drilled. Before candle casting, you can easily pierce the point where you will pass the wick using a tool called a "piercer" or a medium-thickness quilting needle within seconds without damaging the mold.
- Level the Surface: To achieve a flawless form, ensure the surface where you place the mold before casting is flat and level.
- Heat Balance: To get smooth details from the mold, pay attention to the melting temperature and casting heat of the wax. Trying to remove the candle from the mold before it is completely cooled and solidified may cause loss of details and shape differences.
- Colored Casting Tip: If your wax mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions will minimize color transfer in your subsequent castings. To reduce workload and avoid risks, we recommend having separate molds for colored and white castings.
- Use of Mold Release Spray: For mass production, you can use mold release spray to extend the mold's life and remove objects quickly. When applying, ensure an even layer on the inner surfaces of the mold.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the inside of the mold with a hot air gun and wipe off wax residues with a paper towel. Then wash with soapy water and dry thoroughly.
- Perfect Storage: Silicone is flexible and may deform under pressure over time. Make sure your mold is completely dry and place it in its original kraft box. Store away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You can use wet wipes, adhesive tape, or cologne wipes for instant cleaning.
Remember, every candle casting is an enjoyable experience. We wish you a joyful and patient production process.
