Product Info
PRODUCT DIMENSIONS
- Candle sizes from the molds:
- Lotus Flower 1 - 8 cm diameter x 3.2 cm height
- Lotus Flower 2 - 8 cm diameter x 3 cm height
- Lotus Flower 3 - 8 cm diameter x 3 cm height
- Lotus Flower 4 - 8 cm diameter x 3 cm height
- Lotus Flower 5 - 8 cm diameter x 4 cm height
- Lotus Flower 6 - 9.5 cm diameter x 3.5 cm height
- Lotus Flower 7 - 8.5 cm diameter x 4.5 cm height
- Lotus Flower 8 - 8.7 cm diameter x 5 cm height
- Average total candle weight: ~545 g
- Lotus Flower 1 - 55 g
- Lotus Flower 2 - 55 g
- Lotus Flower 3 - 55 g
- Lotus Flower 4 - 45 g
- Lotus Flower 5 - 65 g
- Lotus Flower 6 - 70 g
- Lotus Flower 7 - 100 g
- Lotus Flower 8 - 100 g
- Total mold weight: 1055 g
- Lotus Flower 1 - 120 g
- Lotus Flower 2 - 135 g
- Lotus Flower 3 - 100 g
- Lotus Flower 4 - 120 g
- Lotus Flower 5 - 140 g
- Lotus Flower 6 - 140 g
- Lotus Flower 7 - 150 g
- Lotus Flower 8 - 150 g
- This set contains 8 lotus flower molds.
- You can create 8 different lotus flower-shaped candles in one casting using all molds.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made of durable white silicone with optimal hardness that will not damage candle details. They are flexible with smooth inner surfaces.
- Casting Guarantee: With proper storage and usage, you can cast approximately 500 candles.
- Multi-Purpose Casting Advantage: Due to their design, silicone molds are suitable for multiple casting materials besides candles, including soap, concrete, epoxy, scented stones, ceramics, and plaster. Pay attention to the freezing and working conditions of your material. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in images are not included. Only the high-quality silicone molds to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product is shipped in a special kraft box with a label containing weight and size information to help you calculate raw material usage easily. This prevents waste and eliminates the need to search for data digitally each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean molds with soapy water and dry thoroughly before use.
- Wick Placement: Molds are sent without wick holes opened or cut, due to their multi-purpose casting advantage. Before candle casting, you can easily pierce the wick hole in seconds without damaging the mold using a tool called a "piercer" or a medium-thickness quilting needle.
- Level the Surface: Ensure the surface where you place the mold is flat and level before casting to achieve a perfect form.
- Temperature Balance: To get smooth details, pay attention to the melting and casting temperature of the wax. Removing the candle before it is fully cooled and solidified may cause loss of details and shape differences.
- Colored Casting Tip: If your wax mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions will minimize color transfer for future castings. To reduce workload and risk, consider having separate molds for colored and white castings.
- Use of Mold Release Spray: For mass production, you can use mold release spray to extend mold life and release objects faster. Apply evenly inside the mold to form a uniform layer.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the mold interior with a hot air gun and wipe off wax residues with paper towel. Then wash with soapy water and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure molds are completely dry before placing them back in their original kraft box. Store away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or alcohol wipes for quick cleaning.
Remember, every candle casting is a delightful experience. We wish you patience and joy in your production process.
