Product Info
PRODUCT DIMENSIONS
- Dimensions of the container from the mold:
- Inside diameter: 7.2 cm x 10 cm height
- Outside diameter: 9.2 cm x 11 cm height
- Widest outside diameter: 10.4 cm
- Container weight: approx. 500 g average value, based on stone powder casting
- Mold weight: 550 g
- Hoop weight: 108 g
- Total mold + hoop weight: 648 g
- Liquid capacity of the container: 500 g
- You can produce 1 container per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: Molds are made of durable white silicone with optimal hardness that does not damage object details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: With proper storage and usage, you can cast approximately 500 objects.
- Supportive PLA Hoop Attachment: The outer hoop is made from PLA, an organic bioplastic material, to perfectly maintain the form during casting. Hoop color may vary depending on stock.
- Multi-Purpose Casting Advantage: Due to their design, silicone molds are suitable for various casting materials except stone powder; compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster. Pay attention to drying and working conditions of your material. Not recommended for food products.
- Package Contents: The containers shown in images are not included. Your order includes only the high-quality silicone mold to produce containers. The package contains 5 pieces: 1 silicone mold, 2 PLA hoop parts, and 2 clamps.
- Special Kraft Box and Information Label: Your product is shipped in a special kraft box with a label containing weight and size information to help you calculate raw material usage easily. This prevents material waste and eliminates the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: Clean molds with soapy water and dry thoroughly before use.
- PLA Hoop Usage: Before casting, fit the hoop onto the silicone mold and secure with clamps. This prevents the silicone from stretching and deforming during casting. Important: Do not apply direct heat (hair dryer, heat gun, etc.) to the hoop as high temperatures may deform or melt the PLA material.
- Level the Surface: Ensure the surface where you place the mold is flat and level for a perfect form.
- Stone Powder Mixing Ratio Tip: Reference ratio is 310-350 g water per 1 kg stone powder. Correct water ratio ensures stronger, more durable objects. Higher water increases brittleness; lower water makes pouring and spreading harder. Adjust ratios seasonally with temperature changes.
- Air Bubble Warning: Adding Li-Quit Air Entrainer at 1-3 g per 100 g mixture reduces air bubbles. After pouring, gently tap the mold to help bubbles rise to the surface.
- Demolding Time: To preserve smooth details, do not remove the object before the stone powder fully cures and heat phase ends.
- Mold Release Spray Usage: For serial production, use mold release spray to extend mold life and ease demolding. Apply an even layer on the mold’s inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: Wash with soapy water and dry thoroughly after casting.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Store completely dry molds in their original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: Use wet wipes, adhesive tape, or alcohol wipes as needed.
Remember, each casting is a rewarding experience. We wish you patience and joy in your production process.
