Product Info
PRODUCT DIMENSIONS
- Dimensions of the container from the mold:
- Inside diameter: 6.7 cm x 7.5 cm height
- Outside diameter: 8.5 cm x 8 cm height
- Lid dimensions: 8.5 cm diameter x 1.5 cm thickness
- Container weight: ~250 g average value, based on stone powder casting
- Lid weight: 117 g
- Container + Lid weight: 367 g
- Mold container weight: 382 g silicone
- Mold lid weight: 85 g silicone
- Hoop weight: 75 g
- Total weight of mold + lid + hoop: 542 g
- Liquid capacity of the container: 180 g
- You can produce 1 container with lid per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: Molds are made from durable white silicone with optimal hardness that will not damage object details. They are flexible with smooth inner surfaces.
- Casting Guarantee: If storage and usage instructions are followed, you can cast approximately 500 objects.
- Supportive PLA Hoop Attachment: The outer hoop is made from PLA, an organic bioplastic, to perfectly maintain the form during casting. Hoop color may vary depending on stock.
- Multi-Purpose Casting Advantage: Due to their design, silicone molds are suitable for multiple casting materials except stone powder; compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster. Pay attention to drying and working conditions of your material. Not recommended for food products.
- Package Contents: The containers shown in images are not included. Your order includes only a high-quality silicone mold for producing the container. The package consists of 6 parts: 1 silicone mold, 1 silicone lid, 2 PLA hoops, and 2 clamps.
- Special Kraft Box and Information Label: Your product is shipped in a special kraft box with a label containing weight and size information to help you calculate raw material usage easily, preventing waste and eliminating the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: Clean molds with soapy water and dry thoroughly before use.
- PLA Hoop Usage: Before casting, place the hoop on the silicone mold and secure with clamps. This prevents deformation of the silicone during casting. Important: Do not apply direct heat (hair dryer, heat gun, etc.) to the hoop as high temperatures may deform or melt the PLA material.
- Level the Surface: Ensure the surface where you place the mold is flat and level for a perfect form.
- Stone Powder Mixing Ratio Tip: Reference ratio is 310-350 g water per 1 kg stone powder. Correct water-to-powder ratio ensures stronger, more durable objects. Higher water increases fragility; lower water makes pouring and spreading difficult. Adjust ratios seasonally with temperature changes.
- Air Bubble Warning: Adding Li-Quit Air Entrainer at 1-3 g per 100 g mortar reduces air bubbles after mixing stone powder and water. Lightly tapping the mold after pouring helps bubbles rise to the surface.
- Demolding Time: To preserve smooth details, do not remove the object from the mold before the stone powder fully cures (heating phase ends).
- Mold Release Spray Usage: For serial production, use mold release spray to extend mold life and ease object removal. Apply an even layer inside the mold.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: Wash with soapy water and dry thoroughly after casting.
- Proper Storage: Silicone is flexible and can deform under pressure over time. Store completely dry molds in their original kraft box, away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: Use wet wipes, adhesive tape, or alcohol wipes as needed.
Remember, each casting is an enjoyable experience. We wish you patience and pleasure in your production process.
