Product Info
- Candle dimensions from the mold: 7 cm diameter x 10 cm height
- Average candle weight: ~290 g
- Mold weight: 320 g
- You can produce 1 bubble cylinder-shaped candle per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made from durable white silicone with optimal hardness that does not damage candle details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: If storage and usage conditions are followed, you can cast candles approximately 500 times.
- Multi-Purpose Casting Advantage: Due to their silicone composition, these molds are suitable for multiple casting uses. Besides candle casting, they are compatible with soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to the freezing and working conditions of your raw material, you can create many different products. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in the images are not included in the sale. Only the high-quality silicone mold that allows you to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing gram and size information to help you calculate raw material amounts easily. This label prevents material waste and saves you from searching for digital data every time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since the molds have multi-purpose casting advantages, they are sent without wick holes being cut or pierced. Before candle casting, you can easily pierce the point where you will pass the wick using a tool called a "piercer" or a medium-thickness quilting needle in seconds without damaging the mold.
- Level the Surface: To achieve a flawless form, ensure the surface where you place the mold before casting is flat and level.
- Temperature Balance: To get smooth details from the mold, pay attention to the candle's melting and casting temperature. Trying to remove the candle from the mold before it is fully cooled and solidified may cause loss of details and shape differences.
- Colored Casting Tip: If your candle mixture is colored, the silicone mold may change color after casting. By following cleaning and storage instructions, you can minimize color transfer for subsequent castings. To reduce workload and risk, we recommend having separate molds for colored and white castings.
- Use of Mold Release Spray: For mass production, you can use mold release spray to extend mold life and quickly release objects from the mold. When applying, ensure an even layer on the mold's inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the inside of the mold with a heat gun and wipe off candle residues with paper towels. Then wash with soapy water and dry thoroughly.
- Perfect Storage: Since silicone is flexible, it may warp over time under pressure. Make sure your mold is completely dry and store it in its original kraft box. Keep it away from direct sunlight, high heat, and heavy objects.
- Quick Cleaning: You can use wet wipes, adhesive tape, or alcohol wipes for quick cleaning.
Remember, every candle casting is an enjoyable experience. We wish you a joyful and patient production process.
