Product Info
PRODUCT DIMENSIONS
- Candle dimensions from the mold: 4.2 cm width x 3 cm depth x 10 cm height
- Average candle weight: ~64 g
- Mold weight: 118 g
- You can create one female body-shaped candle per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made from durable white silicone with optimal hardness that does not damage candle details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: If storage and usage conditions are followed, you can cast approximately 500 candles with the mold.
- Multi-Purpose Casting Advantage: Due to their design, silicone molds offer multi-purpose casting benefits. Besides candle casting, they are compatible with soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to the freezing and working conditions of your raw material, you can create many different products. Not recommended for food products.
- Package Contents: The candle and stone powder castings shown in the images are not included in the sale. Only the high-quality silicone mold that allows you to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing weight and dimension information to help you calculate raw material usage easily. This label prevents material waste and saves you from searching for this data digitally each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since the molds have multi-purpose casting advantages, they are sent without wick holes being cut or pierced. Before candle casting, you can easily pierce the wick hole at the desired point using a tool called a "piercer" or a medium-thickness quilting needle within seconds without damaging the mold.
- Level the Surface: To achieve a flawless form, ensure the surface where you place the mold before casting is flat and level.
- Temperature Balance: To preserve the mold’s details smoothly, pay attention to the candle’s melting and casting temperature. Trying to remove the candle from the mold before it is completely cooled and solidified may cause loss of details and shape differences.
- Colored Casting Tip: If your candle mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions will minimize color transfer for your subsequent castings. To reduce workload and avoid risks, we recommend having separate molds for colored and white castings.
- Use of Mold Release Spray: For serial productions, you can use mold release spray to extend mold life and quickly release the object from the mold. When applying the spray, ensure an even layer forms on the mold’s inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the inside of the mold with a hot air gun and wipe off candle residues with paper towels. Then wash with soapy water and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure your mold is completely dry before placing it back into its original kraft box. Store away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or cologne wipes for instant cleaning.
Remember, each candle casting is an enjoyable experience. We wish you a joyful and patient production process.
