Product Info
PRODUCT DIMENSIONS
- Dimensions of the container from the mold:
- Inside diameter: 7 cm x 8.6 cm height
- Outside diameter: 9 cm x 9.2 cm height
- Dimensions of the lid from the mold: 9 cm diameter x 1.4 cm thickness
- Container + Lid dimensions: 9 cm diameter x 1 cm thickness
- Container weight: ~340 g average value (based on stone powder casting)
- Lid weight: 100 g
- Container + Lid weight: 440 g
- Mold container weight: 460 g silicone
- Mold lid weight: 100 g silicone
- Hoop weight: 80 g
- Total weight of mold + lid + hoop: 640 g
- Liquid capacity of the container: 330 g
- You can produce 1 circular form container with lid per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: Molds are made of durable white silicone with optimal hardness that does not damage object details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: If storage and usage conditions are followed, you can cast approximately 500 objects.
- Supportive PLA Hoop Attachment: The outer hoop is made of PLA, an organic bioplastic material, to perfectly maintain the form during casting. Hoop color may vary depending on stock.
- Multi-Purpose Casting Advantage: Due to their structure, silicone molds offer multi-purpose casting advantages. Except for stone powder casting, they are compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to drying and working conditions of your raw materials, you can create many different products. Not recommended for food products.
- Package Contents: The containers shown in the images are not included in the sale. Only a high-quality silicone mold that allows you to produce containers will be sent with your order. The package includes 6 pieces: 1 silicone mold, 1 silicone lid, 2 PLA hoops, and 2 clamps.
- Special Kraft Box and Information Label: Your product will be sent in a special kraft box with a label containing weight and size information to help you calculate raw material usage easily. This label prevents material waste and eliminates the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry thoroughly before use.
- PLA Hoop Usage: Before casting, place the hoop on the silicone mold and secure it with clamps. This prevents the silicone from stretching and deforming during casting. Important warning: Do not apply direct heat (hair dryer, heat gun, etc.) to the hoop. High heat can deform or melt the PLA material.
- Level the Surface: Ensure the surface where you place the mold before casting is flat and level for a perfect form.
- Stone Powder Mixture Ratio Tip: The reference mixture ratio is 310-350 g water per 1 kg stone powder. Correct water-to-powder ratio ensures a stronger and more durable object. Increasing water ratio increases fragility; decreasing it makes pouring and spreading the mixture harder. Adjust ratios seasonally as ambient temperature changes.
- Air Bubble Warning: Adding the appropriate amount of Li-Quit Air Entrainer after mixing stone powder with water minimizes air bubbles. Reference ratio is 1-3 g Li-Quit per 100 g mortar. Also, gently tapping the mold after pouring helps bubbles rise to the surface.
- Demolding Time: To get smooth details, do not remove the object from the mold before the stone powder fully cures and the heating phase ends.
- Mold Release Spray Usage: For serial production, use mold release spray to extend mold life and speed up demolding. Apply an even layer on the mold's inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: Wash with soapy water and dry thoroughly after casting.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Ensure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or alcohol wipes for quick cleaning.
Remember, each casting is an enjoyable experience. We wish you patience and pleasure in your production process.
