Product Info
PRODUCT DIMENSIONS
- Candle sizes from the mold:
- Large: 9 cm width x 9 cm length x 9.5 cm height
- Medium: 7 cm width x 7 cm length x 8 cm height
- Small: 6 cm width x 6 cm length x 7 cm height
- Average total candle weight: ~396 g
- Large: 224 g
- Medium: 104 g
- Small: 68 g
- Total mold weight: 938 g
- Large: 506 g
- Medium: 254 g
- Small: 178 g
- You can create 3 pyramid-shaped candles in three different sizes from one pour using the three molds.
- The patterns on the four surfaces of the molds differ from each other.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made from durable white silicone with optimal hardness to prevent damage to candle details. They are flexible and have smooth inner surfaces.
- Pouring Guarantee: With proper storage and use, you can pour candles approximately 500 times.
- Multi-Purpose Pouring Advantage: Due to their design, silicone molds are suitable for multiple casting uses. Besides candle pouring, they are compatible with soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By considering the freezing and working conditions of your raw materials, you can create many different products. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in the images are not included in the sale. Only the high-quality silicone molds that allow you to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing weight and dimension information to help you calculate raw material needs easily. This label prevents material waste and eliminates the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since the molds have multi-purpose casting advantages, wick holes are not pre-cut or pierced. Before candle pouring, you can easily pierce the wick hole in seconds without damaging the mold using a tool called a "biz" or a medium-thickness quilting needle.
- Level the Surface: To achieve a perfect form, ensure the surface where you place the mold before pouring is flat and level.
- Temperature Balance: Pay attention to the melting and pouring temperature of the wax to ensure smooth mold details. Trying to remove the candle before it is completely cooled and solidified may cause loss of details and shape irregularities.
- Colored Pouring Tip: If your wax mixture is colored, the silicone mold may change color after pouring. Following cleaning and storage instructions will minimize color transfer in subsequent pours. To reduce workload and risk, it is recommended to have separate molds for colored and white pours.
- Use of Mold Release Spray: For serial productions, you can use mold release spray to extend mold life and release objects quickly. Apply the spray evenly on the mold's inner surfaces to form a uniform layer.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After pouring, gently heat the inside of the mold with a heat gun and wipe off wax residues with paper towels. Then wash with soapy water and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or alcohol wipes for instant cleaning.
Remember, every candle pouring is an enjoyable experience. We wish you patience and pleasure throughout your production process.
