Product Info
PRODUCT DIMENSIONS
- Candle dimensions from the mold: 4 cm diameter x 3.7 cm height including wick
- Average candle weight: ~50 g
- Mold weight: 60 g
- You can create one small pumpkin-shaped candle per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made from durable white silicone with optimal hardness that does not damage candle details. They are flexible with smooth inner surfaces.
- Casting Guarantee: When stored and used properly, you can cast approximately 500 candles with the mold.
- Multi-Purpose Casting Advantage: Due to their design, silicone molds are suitable for various casting materials besides candles; including soap, concrete, epoxy, scented stones, ceramics, and plaster. By considering the freezing and working conditions of your material, you can create many different products. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in the images are not included in the sale. Only the high-quality silicone mold to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing gram and size information to help you calculate raw material usage easily. This label helps prevent material waste and eliminates the need to search for this data digitally each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry thoroughly before use.
- Wick Placement: Since the molds have multi-purpose casting advantages, they are sent without wick holes being cut. Before candle casting, you can easily pierce the wick hole in seconds without damaging the mold using a tool called “biz” or a medium-thickness quilting needle.
- Level the Surface: To achieve a perfect form, ensure the surface where you place the mold before casting is flat and level.
- Temperature Balance: Pay attention to the melting and casting temperature of the wax to ensure smooth mold details. Removing the candle from the mold before it is fully cooled and solidified may cause loss of details and shape irregularities.
- Colored Casting Tip: If your wax mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions will minimize color transfer in subsequent castings. To reduce workload and risk, it is recommended to have separate molds for colored and white castings.
- Use of Mold Release Spray: For serial production, you can use mold release spray to extend mold life and release objects quickly. Apply the spray evenly on the inner surfaces of the mold.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the inside of the mold with a hot air gun and wipe off wax residues with paper towels. Then wash with soapy water and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You can use wet wipes, adhesive tape, or cologne wipes for instant cleaning.
Remember, every candle casting is an enjoyable experience. We wish you patience and joy in your production process.
