Product Info
PRODUCT DIMENSIONS
- Candle sizes from the mold:
- Large: 2 cm width x 2.3 cm length x 1 cm height
- Medium: 1.2 cm width x 1.6 cm length x 0.8 cm height
- Small: 1 cm width x 1.1 cm length x 0.5 cm height
- Average candle weight: ~4.7 g
- Mold weight: 40 g
- You can produce 7 strawberry-shaped candles per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made of durable white silicone with optimal hardness to avoid damaging candle details. They are flexible with smooth inner surfaces.
- Casting Guarantee: With proper storage and usage, you can cast candles approximately 500 times.
- Multi-Purpose Casting Advantage: Due to their design, silicone molds are suitable for various casting materials besides candles, including soap, concrete, epoxy, scented stones, ceramics, and plaster. By considering the freezing and working conditions of your raw materials, you can create many different products. Not recommended for food items.
- Package Contents: The candles and stone powder castings shown in the images are not included. Only the high-quality silicone mold to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing gram and size information to help you calculate raw material usage easily. This prevents material waste and eliminates the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since the molds support multi-purpose casting, wick holes are not pre-cut or pierced. Before candle casting, you can easily pierce the wick hole in seconds without damaging the mold using a tool called "biz" or a medium-thickness quilting needle.
- Level the Surface: To achieve a perfect form, ensure the surface where you place the mold is flat and level before casting.
- Temperature Balance: Pay attention to the melting and casting temperature of the wax to ensure smooth mold details. Removing the candle from the mold before it is fully cooled and solidified may cause loss of details and shape deformation.
- Colored Casting Tip: If your wax mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions will minimize color transfer in subsequent castings. To reduce workload and risk, it is recommended to have separate molds for colored and white castings.
- Use of Mold Release Spray: For serial production, you can use mold release spray to extend mold life and release objects quickly. Apply the spray evenly on the mold’s inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the mold interior with a hot air gun and wipe off candle residues with paper towels. Then wash with soapy water and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry before placing it back into its original kraft box. Store away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or cologne wipes for instant cleaning.
Remember, every candle casting is an enjoyable experience. We wish you patience and joy throughout your production process.
