Tombstone Geyik Boynuzu Patterned Silicone Candle Mold

PRODUCT DIMENSIONS

• Candle dimensions from the mold: 5 cm width x 6.5 cm length x 2.7 cm height
• Average candle weight: ~45 g
• Mold weight: 80 g
• You can create one candle in the shape of a gravestone with a deer antler pattern per casting.

GENERAL PRODUCT INFORMATION

• Optimal Hardness: The molds are made from durable white silicone with optimal hardness that does not damage candle details. They are flexible and have smooth inner surfaces.
• Casting Guarantee: If storage and usage instructions are followed, you can cast approximately 500 candles with this mold.
• Multi-Purpose Casting Advantage: Due to their silicone composition, these molds are suitable for various casting materials besides candle wax, including soap, concrete, epoxy, scented stone, ceramic, and plaster. Please pay attention to the freezing and working conditions of your casting material. Not recommended for food products.
• Package Contents: The candles and stone powder castings shown in the images are not included in the sale. Only the high-quality silicone mold that allows you to produce these objects will be sent with your order.
• Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing gram and dimension information to help you calculate raw material usage easily. This label helps prevent material waste and eliminates the need to search for this data digitally each time.

USAGE INSTRUCTIONS

• First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
• Wick Placement: Since the molds have multi-purpose casting advantages, they are sent without wick holes being cut or drilled. Before candle casting, you can easily create the wick hole at the desired point using a tool called a "biz" or a medium-thickness quilting needle without damaging the mold.
• Level the Surface: To achieve a perfect form, ensure the surface where you place the mold is flat and level before casting.
• Temperature Balance: Pay attention to the melting and casting temperature of the wax for smooth detail results. Removing the candle from the mold before it is fully cooled and solidified may cause loss of details and shape deformation.
• Colored Casting Tip: If your wax mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions will minimize color transfer in subsequent castings. To reduce workload and risk, it is recommended to have separate molds for colored and white castings.
• Use of Mold Release Spray: For serial production, you can use mold release spray to extend mold life and facilitate quick removal of objects. Apply the spray evenly on the inner surfaces of the mold.

CLEANING AND STORAGE INSTRUCTIONS

• Post-Use Cleaning: After casting, gently heat the inside of the mold with a heat gun and wipe off candle residues with paper towels. Then wash with soapy water and dry thoroughly.
• Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry before placing it back into its original kraft box. Store away from direct sunlight, high heat, and heavy weights.
• Quick Cleaning: You can use wet wipes, adhesive tape, or cologne wipes for quick cleaning.

Remember, every candle casting is an enjoyable experience. We wish you patience and pleasure throughout your production process.