Product Info
PRODUCT DIMENSIONS
- Candle dimensions from the mold: 8 cm width x 5 cm length x 11.5 cm height
- Average candle weight: ~150 g
- Mold weight: 450 g
- You can create one veil-adorned Virgin Mary shaped candle per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made from durable white silicone with optimal hardness that does not damage candle details. They are flexible with smooth inner surfaces.
- Casting Guarantee: If storage and usage conditions are followed, you can cast approximately 500 candles.
- Multi-Purpose Casting Advantage: Due to their structure, silicone molds offer multi-purpose casting benefits. Besides candle casting, they are compatible with soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to the freezing and working conditions of your raw materials, you can create many different products. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in the images are not included in the sale. Only the high-quality silicone mold that allows you to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing gram and dimension information to help you calculate raw material amounts easily. This label prevents material waste and eliminates the need to search for this data digitally each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since the molds have multi-purpose casting advantages, they are sent without wick holes being cut or drilled. Before candle casting, you can easily pierce the point where the wick will pass using a tool called "biz" or a medium-thickness quilting needle within seconds without damaging the mold.
- Mold Cutting: The mold’s opening is narrower than the body. Therefore, cut the mold vertically along the dotted lines shown in the visuals using a cutting tool (box cutter, craft knife, etc.). Before casting, align the cut surfaces precisely and press them together, securing tightly with a rubber band. This cutting process allows your detailed candle to come out of the mold easily without damage, prevents mold tearing, and extends its lifespan.
- Level the Surface: To achieve a flawless form, ensure the surface where you place the mold before casting is flat and level.
- Temperature Balance: For smooth detail results, pay attention to the candle’s melting and casting temperatures. Trying to remove the candle before it is fully cooled and solidified may cause loss of details and shape distortions.
- Colored Casting Tip: If your candle mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions will minimize color transfer in future castings. To reduce workload and avoid risks, we recommend having separate molds for colored and white castings.
- Use of Mold Release Spray: For mass production, you can use mold release spray to extend mold life and release objects quickly. Apply the spray evenly on the mold’s inner surfaces to form a uniform layer.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the mold interior with a hot air gun and wipe off candle residues with paper towels. Then wash with soapy water and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure your mold is completely dry before placing it back in its original kraft box. Store away from direct sunlight, high heat, and heavy weight.
- Quick Cleaning: You can use wet wipes, adhesive tape, or cologne wipes for instant cleaning.
Remember, every candle casting is a delightful experience. We wish you enjoyable and patient work during your production process.
