Product Info
PRODUCT DIMENSIONS
- Candle size from mold: 2.5 cm diameter x 3.3 cm height
- Average candle weight: ~8 g
- Mold weight: 32 g
- You can produce 1 balloon-shaped candle per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made of durable white silicone with optimal hardness to prevent damage to candle details. They are flexible with smooth inner surfaces.
- Casting Guarantee: With proper storage and use, you can cast approximately 500 candles.
- Multi-Purpose Casting Advantage: Due to their silicone composition, these molds are suitable for multiple casting materials besides candles, including soap, concrete, epoxy, scented stones, ceramics, and plaster. Pay attention to the freezing and working conditions of your casting material. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in the images are not included. Only the high-quality silicone mold to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing gram and size information to help you calculate raw material usage easily. This prevents material waste and eliminates the need to search for data digitally each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: The molds are sent without wick holes being cut or drilled. Before casting, you can easily create the wick hole using a tool called a "biz" or a medium-thickness quilting needle without damaging the mold.
- Mold Cutting: The mold’s opening is narrower than the body to perfectly form the balloon shape. When viewed from above, cut approximately 1 cm from two opposite horizontal and vertical legs in a plus (+) shape at the opening. The uncut side legs should be pulled outward after drying to remove the candle. Before casting, align and press the cut surfaces tightly together. This cutting process helps your detailed candle release easily without damage and extends mold life by preventing tears.
- Level the Surface: Ensure the surface where you place the mold before casting is flat and level for a perfect form.
- Temperature Balance: To preserve mold details, pay attention to the candle’s melting and casting temperatures. Removing the candle before it is fully cooled and solidified can cause loss of detail and shape distortion.
- Colored Casting Tip: If your candle mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions minimizes color transfer for future castings. To reduce workload and risk, it is recommended to have separate molds for colored and white castings.
- Use of Mold Release Spray: For mass production, using a mold release spray can extend mold life and help release objects quickly. Apply an even layer on the mold’s inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the mold interior with a heat gun and wipe off candle residues with paper towels. Then wash with soapy water and dry thoroughly.
- Proper Storage: Silicone is flexible and can deform under pressure over time. Make sure the mold is completely dry before placing it back in its original kraft box. Store away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You can use wet wipes, adhesive tape, or alcohol wipes for instant cleaning.
Remember, every candle casting is an enjoyable experience. We wish you patience and pleasure in your production process.
