Product Info
PRODUCT DIMENSIONS
- Candle size from mold: 2 cm diameter x 2 cm height
- Average candle weight: ~4 g
- Mold weight: 22 g
- You can produce 1 balloon-shaped candle per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made of durable white silicone with optimal hardness that does not damage candle details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: With proper storage and usage, you can cast approximately 500 candles.
- Multi-Purpose Casting Advantage: Due to their design, silicone molds are suitable for multiple casting materials besides candles; compatible with soap, concrete, epoxy, scented stones, ceramics, and plaster. Pay attention to the freezing and working conditions of your casting material. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in the images are not included. Only the high-quality silicone mold to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing gram and size information to help you calculate raw material usage easily. This prevents material waste and eliminates the need to search for this data digitally each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry thoroughly before use.
- Wick Placement: Molds are sent without wick holes being cut or pierced due to their multi-purpose casting advantage. Before candle casting, you can easily pierce the wick hole in seconds without damaging the mold using a tool called a "biz" or a medium-thickness quilting needle.
- Mold Cutting: The mold’s opening is narrower than the body to perfectly form the balloon shape. Therefore, when looking from above, cut two opposite horizontal and vertical legs of the mold’s opening approximately 1 cm. The uncut side legs should be pulled outward after drying to remove the candle. Before casting, align and press the cut surfaces tightly together. This cutting process allows your detailed candle to be removed easily without damage, prevents mold tearing, and extends its lifespan.
- Level the Surface: Ensure the surface where you place the mold before casting is flat and level to achieve a perfect form.
- Temperature Balance: To get smooth details, pay attention to the candle’s melting and casting temperatures. Removing the candle from the mold before it is fully cooled and solidified may cause loss of detail and shape deformation.
- Colored Casting Tip: If your candle mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions minimizes color transfer for future castings. To reduce workload and risk, we recommend having separate molds for colored and white castings.
- Use of Mold Release Spray: For mass production, you can use mold release spray to extend mold life and release objects quickly. Apply the spray evenly inside the mold to form a uniform layer.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the inside of the mold with a heat gun and wipe candle residues with a paper towel. Then wash with soapy water and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or alcohol wipes for instant cleaning.
Remember, every candle casting is an enjoyable experience. We wish you patience and pleasure throughout your production process.
